How to Setup HP Envy 4501 Driver

How to setup HP envy 4501 drivers

The HP Envy 4501 is an All-in-one wireless printer that gives clean images with a virtual lab quality. With its multifunctions features, most of the users are using it. If you are an HP Envy 4501 printer user and you are going to set it up for the first time, then you may difficulty to set up your device. 

Here, we will provide a comprehensive guide on how to set up the HP Envy 4501 printer on your computer. 

Step-By-Step Process to Set Up HP Envy 4501 Printer on Device:

Below we have listed the step-by-step process to set up the HP Envy 4501 printer on your device. 

Step 1 – Unbox the HP Printer

First of all, remove all the protective tapes, plastic, and packaging materials from the HP printer. After that, remove all the tapes inside of the printer. Once it is removed, you can set the printer back down and then go to the access door and lift it up. Remove the tape and then close the door.

Step 2 – Connect the Power Cord

Plug power cable to the back of the printer. After that, connect the Power cord to the power source and then turn on the HP printer by pressing the Power button. After switching on the printer, go to the printer Control Panel and set the language, country, and date & time for the device.  

Step 3 – Insert the Ink Cartridges

Now, insert the ink cartridges to the printer. Open the top cover and the carriage will move into the access area. After that, unpack the cartridges and then install them correctly to the correct port. Now, push the ink cartridge until it clicks. Once the ink cartridges are installed on your printer, close the access door.  

Step 4 – Load the A4 Paper

Open the input tray of the printer. Lift the cover output paper tray. After that, fan the A4 paper stack and gently load it into the input tray. Now, push the paper width guides until it fits in position. Before going to print, you need to align the papers. Once the paper is inserted successfully, an automated printer alignment paper is printed. 

Step 5 – Install the HP Envy 4501 Driver 

After performing the hardware connection, you should install the HP Envy 4501 driver on your computer. To know more about it, follow these steps given below:

  • Go to the official website of the HP and download the HP Envy 4501 printer driver.
  • After downloading it, double-click on the setup file. After that, follow the directions which appear on the screen. 
  • During the installation process, you will get the Connection Options window. Select the Connection type and then click on the Next option. Further, follow the onscreen instructions to complete the installation process.
  • Once the installation process is done, now you can use it. 

These are the complete steps following which you can easily perform the HP Envy 4501 setup.

Leave a Reply

Your email address will not be published. Required fields are marked *

÷ five = 1