How To Fix Canon MP560 Error B200

canon mp560 printer error b200

Canon printers are quite famous for their unique specifications and high printing quality. However, these printers are not completely free from technical bugs and glitches. The Canon MP560 error B200 is one of the most bothersome issues confronted by the users. 

This error usually appears in the Canon MP560 model having 4+ cartridges. It might occur due to certain hardware problems, as the resistor impact on the motherboard can generate an overheating problem. 

If you want to troubleshoot this error message on Canon MP560, let’s take a look at some effective fixes. 

How to Fix Error B200 on Canon MP560 Printer with Simple Hacks?

If you are encountering this Canon MP560 printer error B200, carry out the undermentioned dedicated methods to resolve the problem on your own.

Fix 1: Reset the Canon Printer

This method is quite straightforward and simple when it comes to solving error B200. But, a majority of users claim that after resetting their printers, the error gets removed. So, before proceeding with any critical fix, try to execute this simple one. In order to reset the Canon printer, go through these steps.

  • Firstly, turn off the Canon printer and unplug the power cable.
  • Press the “On/Off” button while you connect the power cable.
  • Now, hit the “Stop” or “Reset” button while holding the “On/Off” button.
  • Thereafter, the printer will be put into the recovery mode. 

After resetting your device, check whether the Canon printer error B200 gets eliminated or not. 

Replace Problematic Ink Cartridges

Usually, such problems can occur in printers due to the composition of the ink in the cartridges. Sometimes, third-party or cheap ink cartridges might have a composition that doesn’t line up with the requirement of the Canon printer. As a result, such kind of errors arises. 

Therefore, we suggest you purchase genuine prescribed ink cartridges for your printer. This will hopefully resolve the Canon B200 error.

Eliminate the Obstructions from Cartridges

If there are any sorts of interference inside your printer cartridges, without omitting those obstructions, you will be unable to resolve the Canon support error. In order to remove those obstructions or interference, follow the instructions cited below.

Step 1: Initially, open the top cover of the printer and lift the ink cartridges. Afterward, take out the printhead that can be easily done by lifting the lever. 

Step 2: In the next step, re-install the printhead back to its location and lock the lever once you are done with it. Thereafter, re-insert all the ink cartridges in their respective slots and ensure that you close all cartridges access doors.

Step 4: Now, unplug the power cable from the printer and wait for a while. This allows the printer to cool down efficiently. Next, connect the power cable back to the printer and turn it on by pressing the “On/Off” button. 

Lastly, you can execute an extensive nozzle check to enable the printer to recognize the cartridges correctly.

Clean the Printhead

Some of the affected users have complained that they get stuck with the Canon MP560 printer error B200 due to certain internal glitches in the printhead. To resolve such internal errors, you can clean the printhead.

First, initiate the printer drivers setup wizard and hit the “Cleaning” button that is located inside the “Maintenance” tab. Once the Print Head Cleaning dialog box pops up on the screen, choose the ink group for which cleaning is to be executed. 

Further, perform the cleaning process by following the on-screen instructions. Hit the “Execute” button when you are promoted. Lastly, complete the cleaning process and check the result by choosing the “Print Check Pattern”. 

Once the printhead cleaning process completes successfully, the Canon MP560 error B200 should be resolved.

Update the Printer Driver

You can also encounter the Canon B200 error if you are using an outdated version of printer drivers for a long time. But, you can easily get rid of this situation by updating the printer drivers. To do so, follow the instructions underneath.

  • Press the combination of the Windows logo + R key to launch the Run window,
  • Under the Run dialog box, write “devmgmt. msc” and hit the Enter key.
  • Choose the Device Manager option from the top search result and invoke the window by tapping on it.
  • Inside the Device Manager, look for the outdated printer drivers from the available list and right-tap on them one by one.
  • From the appeared menu, choose the “Update Driver” button. Afterward, you will find “Search automatically for updated driver software” option that pops up on the screen.
  • Tap on this option and update the printer drivers by following the instructions that are shown on the screen.

After updating the printer drivers, reboot your device to let the new changes take effect. Once your device reboots review whether the Canon error gets eliminated or not.

Reinstall the Printer Drivers

After updating the printer drivers, if you are still stuck with the same error, then we suggest you reinstall them. For this purpose, go through the underlying instructions.

Firstly, open the Run window and type “Control” inside it. Tap on the OK button to invoke the Control Panel window and search for “Programs and Features”.

When you access the “Programs and Features” menu, you will find a list where all the installed applications and the drivers on PC. From the available list, right-tap on the “Printer Drivers” and hit the “Uninstall” button.

Confirm the uninstallation process by tapping on the OK button. Now, visit the official website of Canon and look for the latest printer drivers. Make sure you choose the printer drivers that are completely compatible with your printer model (Canon MP560).

Now, select the printer drivers and choose the “Download Now” button to initiate the downloading process. After completing the downloading process, you can stick to the on-screen guidelines to install the drivers on your device. 

These are the reliable troubleshooting measures that can remove the Canon MP560 error B200.

Leave a Reply

Your email address will not be published. Required fields are marked *

eighteen − 11 =