Brother DCP-l2540dw Wireless Setup Guide

Brother DCP-l2540dw Wireless Setup

Brother DCP-L2540DW is a prominent 3-in-1 monochrome laser multi-function center with an  automatic 2-sided printing. It comes with wireless networking and has been efficient for both home and official work. However, to use it wirelessly, you need to connect with your WiFi by following certain instructions.

In this guide, complete information has been provided for Brother DCP-L2540DW wireless setup. So, follow it to the end to configure your printer seamlessly.

How to Set Up Brother DCP-l2540dw Wirelessly?

Before moving on with the wireless setup process, make sure to note your SSID and Network key located at the backside of your router. If you are unable to find them, contact your manufacturer for such details. 

Unpack the Machine and Verify the Components

Start the setup process by unpacking the machine and removing each protective material/tape from the machine carefully. Also, check whether all the components are present within the package or not. The component list involves a drum unit, AC power cord, quick setup guide, product safety guide, basic user’s guide, telephone line cord, CD-ROM, and Inbox Toner Cartridge.

Install the Toner Cartridges and Drum Units

After unpacking the machine, remove all the packing materials and unpack the drum unit and Toner Cartridges. Install and place the toner cartridge and drum unit within the machine carefully. 

Load Paper Inside the Paper Tray

Drag the paper tray out from the machine completely and adjust the paper guides carefully. Fan the paper to avoid its jamming and place it within the tray. Once done, push the paper tray back inside the machine. 

Connect the Power Cord and Turn Your Machine On

After completing the hardware setup, connect one end of the power cord to the power surface and the other end to the printer consecutively. Turn on your printer machine switch after connecting the power cord.

Driver Installation and Wireless Network Configuration  

Insert the CD within your system and select your printer model as well as language accordingly. Click on Install Printer Driver and agree to the license agreement by clicking Yes. Besides, you can also reach the manufacturer website for driver installation. Enter the printer’s model number and select Windows and its version to do so.

Go to the Control Panel of the printer and press the Menu button. Select your Network and Click Ok. Through the arrows, select the Brother DCP L2540dw Setup Wizard. Once the “WLAN enable?” message displays on your screen, click on Yes to enable Wireless Network.

You will be able to see a list of Network SSIDs. Make sure to choose your Network Name and click Ok. Now the authentication and encryption procedure will ask you to provide the password. Enter your Network Key and then Press Ok. This will connect your Brother DCP-l2540dw wirelessly.

We hope you will be able to successfully set up Brother DCP-l2540dw wirelessly by following the setup guide mentioned above.

Leave a Reply

Your email address will not be published. Required fields are marked *

four × four =