Brother HL-L2350DW Wi-Fi Setup: Quick Setup Guide

Brother HL-L2350DW Wi-Fi Setup

Brother HL-L2350DW is a monochrome laser printer with duplex printing. This Brother printer can print up to 32 pages per minute. With this printer, you can easily print wirelessly from the mobile device. The 250 sheet paper capacity and automatic duplex printing feature can increase the efficiency and offer you the best printing result.

So, if you are ready to use this model of the Brother printer and want to know the Brother HL-L2350DW Wi-fi setup procedure, then this guide might work as a savior to you. You are strongly recommended to go through the article from top to bottom.

How to Setup the Brother HL-L2350DW Printer Wirelessly?

Have a look at the given steps and configure the setup procedure of the Brother HL-L2350DW printer on your own.

Step 1- Unbox the Printer

First, unpack the Brother HL-L2350 printer from the packet and take out the items, such as setup guide, power cable, Brother printer driver, and the installation CD drive.

After that, you need to set the Brother machine on a flat surface and then remove the tape stuck to the machine. Remove the toner cartridges and drum assembly as well as take out the orange packing material.

Now, slide the toner cartridges in the Brother HL-L2350DW printer and close the front cover of the printer. Take an AC USB cable and connect it to the Brother printer. Furthermore, connect it to a power socket.

Turn on the Brother printer and follow the online instructions to complete the rest of the procedure.

Step 2- Installation Steps

Here you will get to know about the installation steps of the Brother HL-L2350 DW printer. However, before proceeding to the installation steps check whether the wireless router is broadcasting the network or not. 

Once you are assured about that, then follow the given directions.

  1. Insert the printer driver CD within the computer and launch the Brother HL-L2350 DW printer. 
  2. Now, use the language drop-down list and choose the driver language. Click on Next to continue.
  3. Select the box next to the ‘T&C agreement clause’ and again click on Next.
  4. Move to the Connection Type screen and from the available options, choose the Wireless Network Connection. Hit the Next option. Now, to connect to the Wi-Fi SSID, tap on Next.
  5. Else, if the “Enable the Wireless Connection” window appears on the display, then you have to press the Wi-fi button of the Brother HL-L2350DW printer. To confirm the Wi-fi setup, use the Down arrow.
  6. After that, the Brother printer will get Wi-fi information from your device. Then, the WLAN confirmation message will show on the display. Here tap on the Brother HL-L2350DW Radio button and after that, click on Next.
  7. On the next screen, choose the Standard Installation. Tap on Next. Thereafter, Brother printer software will be installed on the computer. Hit the Next key.
  8. In order to complete the Brother HL-L2350DW installation procedure, you need to click on the Finish button.

Step 3- Download the Brother HL-L2350 DW Driver

You can quickly download the printer driver from the manufacturer’s official website. Therefore, first, go to the official website of the manufacturer’s and choose the region as well as the sub-region.

Once done, then select Monochrome and after that, you have to select HL-2 from the webpage. Make sure you have correctly selected the Operating System and version. 

Next, click on the Recommended driver button on the display. Now, go to the bottom of the page and tap on the Download button in order to start the downloading process.

Apart from that, you can also manually download the printer driver from the manufacturer’s official website. Like previously, select the region and the sub-region. After that, tap on Manuals.

Thereafter, proceed to the Monochrome. Next, select the Hl-2 series and finally click on the Download button. 

Once you have successfully installed the HL-L2350 DW driver on your system, then you need to install the drivers. In case, you don’t have that much knowledge, then follow the next section.

Here Is- How to Install Driver for Brother HL-L2350DW Printer

Ensure that you have already performed the initial setup of the Brother Hl-L2350 printer. Also, make sure that you set your preferred language.

Now, move to the downloaded location and thereafter, double-click on the ‘.exc’ printer driver folder. After that, read and accept the Licence Agreement. On the next step, choose the Local Connection option. 

Afterward, connect the USB cable between your computer and the Brother HL-L2350 DW printer. Tap on Next and on the next screen, select the Standard options.

Wait for sometimes as the software might take some time to install on the computer. When finished, then insert some paper in the printer and test the connectivity.

Wireless Setup of the Brother HL-L2350 DW Printer

In the beginning, visit the Home screen and choose the Network option. Afterward, tap on the WLAN options and then select the WPS button.

When you see the “WLAN Enable?” message on the screen, then press the OK key. Ensure that the router is turned on and ready to connect. 

After that, the Press key on Rtr message will show on the screen, press the WPS button for a few seconds. The WPS button can be present at the backside of the router.

Once the connection procedure is completed, then the connection message will show on the screen. 

Brother HL-L2350DW Airprint

At first, you need to enable the AirPrint feature on the Web Management page. After that, launch a web browser on the system. After that, type the router’s IP address within the address bar.

Next, hit the Network tab. Furthermore, click on the Protocol button. Mark the box next to the AirPrint option in order to enable it. Click on the Submit button and after that, restart the Brother machine to save the changes.

Then, you have to download the Brother HL-2350DW setup AirPrint application on the iOS device. When finished, install it by using the prompts displayed.

After that, locate the document of the file that you want to print and thereafter, open the file on the iOS device. Once done, move to the File menu. Here, scroll down to the bottom and hit the Print dialog box. Now, check whether the Brother HL-L2350DW printer is selected or not.

Configure the printer setting according to your choice. When finished, click on the Print option. Done

That’s it. Here all the information regarding the Brother HL-L2350 setup procedure is given. Now, you are strongly advised to apply each and every step without ignoring a single one.

Leave a Reply

Your email address will not be published. Required fields are marked *

seventy two ÷ = 24